Real crews.
Real facilities.
Every photo and clip on this page is Nexara's own work, shot on the job. No stock photography.
05
Project types
30
Job photos
08
Job videos
Anyone can put a stock photo of a shiny lobby on a website. These are Nexara crews on real job sites across Southern California: gowned technicians refinishing floors in GMP laboratories, grinding and polishing warehouse concrete, dusting ductwork from a lift in fall protection, and extracting carpet in occupied offices.
Our customers' names and locations are left off on purpose. Many of the facilities we work in are regulated or secure, and discretion is part of the job. Every project below links to the service behind it, so you can see what that work includes and request a walkthrough of your own building.
GMP laboratory floor restoration
Strip, refinish and burnish of lab and production corridors, performed by gowned crews under the facility's cleanroom protocols.
What floor care includes
- Strip and refinish with commercial-grade sealer and finish
- Scheduled burnishing to maintain gloss between cycles
- Auto-scrubbing for warehouse, production and corridor surfaces
- VCT, LVT, sealed concrete, terrazzo and epoxy-coated surfaces
- Scheduled around production, breaks or school calendars
Warehouse concrete polishing
Diamond grinding and polishing of warehouse and production concrete, from racking aisles to open production floors.
What janitorial includes
- Written scope of work with defined frequencies, room by room
- Day porter and night-crew coverage scheduled around production
- Restroom sanitation, refuse handling and consumables management
- Hard-floor and carpet maintenance built into the recurring program
- Documented quality inspections with photo verification
- Single point of contact — you call the owner, not a call center
What floor care includes
- Strip and refinish with commercial-grade sealer and finish
- Scheduled burnishing to maintain gloss between cycles
- Auto-scrubbing for warehouse, production and corridor surfaces
- VCT, LVT, sealed concrete, terrazzo and epoxy-coated surfaces
- Scheduled around production, breaks or school calendars
What stone polishing includes
- Progressive diamond grinding and honing to specified gloss
- Densification and stain protection
- Marble, travertine and terrazzo restoration and polishing
- Scratch and etch repair on natural stone
- Ongoing maintenance programs to protect the finish
High dusting at height
Overhead ductwork, walls and structure cleaned from lifts, with crews in fall-protection harnesses.
What high dusting includes
- Rafters, trusses, beams and roof deck
- Ductwork, pipe runs and cable trays
- Light fixtures and suspended signage
- Tops of racking, doors, frames and equipment
- HEPA vacuum and controlled wiping methods matched to the environment
- Scheduled around production, with the floor below protected
Office carpet extraction
Hot-water extraction of office corridors, workspaces and break rooms.
What carpet cleaning includes
- Hot water extraction for restorative deep cleaning
- Low-moisture encapsulation for fast-turnaround interim cleaning
- Traffic-lane and entryway focus where soil actually loads
- Spot and stain treatment
- Scheduled programs tied to traffic, not guesswork
VCT strip & refinish
Strip, refinish and high-speed burnish of break rooms, cafés and corridors.
What floor care includes
- Strip and refinish with commercial-grade sealer and finish
- Scheduled burnishing to maintain gloss between cycles
- Auto-scrubbing for warehouse, production and corridor surfaces
- VCT, LVT, sealed concrete, terrazzo and epoxy-coated surfaces
- Scheduled around production, breaks or school calendars
About our work.
Are these photos and videos really Nexara's work?
Yes. Every image and clip on this page comes from our own crews on real Nexara jobs. None of it is stock photography, and the crews you see are the people who do the work.
Why don't you name the customers?
Many of the facilities we service are regulated, secure or simply private, and we treat their names and locations as confidential. If you want to know more about a specific project, ask us during your walkthrough and we will tell you what we can.
Can you do this kind of work in my facility?
Most likely. We schedule floor, carpet and high work around your production, shifts or business hours, including nights and weekends. It starts with a walkthrough so the scope is written for your building, not copied from someone else's.
No proposal before a walkthrough
Let's walk your facility.
Every scope starts with a walkthrough. We look at the building, ask what is actually going wrong today, and come back with a written scope and a number — not a brochure.